Tecal 1200S High Temperature Portable Calibration Furnace
View PDF literature on this product

  • Wide temperature range
  • Multi-hole insert block for accurate comparison calibration
  • Rapid heating rates
  • Software available
  • Rugged case with carry handle
  • Simple to use

The Tecal 1200S Block calibrator utilizes a special heater design for optimum temperature uniformity and rapid heating rates. The isothermal block assembly is machined from a special alloy giving excellent thermal conductivity which also resists high-temperature oxidation. This block is designed to optimize performance between sufficient mass for good stability/ uniformity but a low enough mass to achieve rapid heating/cooling rates and stabilization periods. The standard fixed block has 4 extra deep immersion test holes accepting Ø0.8 cm probes x 8 cm deep for use with a reference probe typically an R or S type thermocouple or an SPRT.


 

 

Specifications

Maximum temperature

1200°C

Minimum temperature

150°C

Display accuracy

±3°C

Temperature uniformity

±0.2°C

Temperature stability

±0.2°C (at 1200°C after 20 mins)

Max Power (kw)

0.7

Display resolution

0.1° to 999.9 then 1° to 1200°C; Selectable -- C° or F°

Heating rate, 100°C to 1200°C 20 minutes
Cooling rate, 1200°C to 200°C 140 minutes
Large insert size Ø34mm x 155mm with
4 off bores Ø8mm x 110 depth
Fan cooling Automatic

Dimensions
H x W x D

35 x 20 x 30 cm

Weight

22 lbs

Ordering Information

Catalog #

Description

Voltage

FDB1200XP

Tecal 1200S with RS-232

120

arrsnar.gif (1352 bytes)

Home | Temperature Calibration | Online Store | News
Contact Us | About Us
Copyright © 2008 Techne® Incorporated