LCB-7

LCB-7 Calibration Bath

Compact, accurate and reliable liquid calibration baths. Compare the performance of our calibration baths to other leading manufacturers, then look at our price, you'll be pleasantly surprised!

  1. 7 Liter capacity

  2. Operation Up to 250°C

  3. Temperature stability of +/-0.005°c

  4. Low liquid level cut-out

  5. Drain Tap

  6. Half the cost of other leading manufacturers

  7. Flexible system configurations

  8. Programmable and controllable via Techneworks PC software
    Download Techneworks
    Request literature on this product via mail
Controllers incorporate the safety features of over temperature cut-out and low liquid level device. LCB-7 baths have a thermometer hole to take a reference thermometer, drain tap, lid, carrying handles and insulation on sides and base. A built in cooling coil is included. For deeper immersion depth see our LCB12 system. The system offers a display accuracy of ±0.5°C, but if you require higher accuracy take a look at the Tecal Accu-Temp and one of our secondary standard PRT probes. 

We recommend the use of our bath liquids to get the best performance at a wider range of operating temperatures.    
      

Specifications:
  LCB-7D**          LCB-7HT
Bath Capacity 7 liters 7 liters
Operating temperature range ºC -35 to 200 1 ambient +10 to 250
Working temperature range2 ºC 25 to 200 30 to 250
Display resolution 0.1 0.1
Stability at -35°C (*) 1 +/-0.015 N/A
Stability at 0°C (*) 1 +/-0.020 N/A
Stability at 50°C (*) +/-0.005 +/-0.005
Stability at 100°C (*) +/-0.015 +/-0.015
Stability at 200°C (*) +/-0.024 +/-0.024
Uniformity (full range***) 0.008 0.008
Accuracy ºC (full range) +/-0.5 +/-0.5
Temp. Sensor PRT PRT
Working Area in. LxWxD 5.6x6x7 5.6x6x7
Controller length/width 9.3/4.9 9.3/4.9
Height with controller 13.5 13.5

Ordering Information:
LCB7/TU20D system 120V 3022301  
LCB7/TU20D system 240V 3022305  
LCB7/TU20HT system 120V   3022303
LCB7/TU20HT system 240V   3022304
LCB7 bath less controller 3022300 3022300
FC500 Flow Cooler (-35ºC) 120V 1070800 N/A
FC500 Flow Cooler (-35ºC) 240V 1070850 N/A
FC200 Flow Cooler (-20ºC) 120V 1070700 N/A
FC200 Flow Cooler (-20ºC) 240V 1070750 N/A
See details on the TU20D and TU20HT Thermoregulators

1) With an FC-500 flow cooler; 2) ambient of 20°C
*Stability is over a 15 minute period
**For below ambient temperatures see Techne 's flow coolers.**
***Two SPRT's 3" apart in the working area of bath.***

Home | Temperature Calibration | Online Store | News
Contact Us | About Us
Copyright © 2006 Techne® Incorporated