Fluids for Liquid BathsWant to get the best performance from TechneŽ liquid baths or those obtained from other sources? We highly recommend the purchase of our bath fluids that offer proven bath performance at a lower cost than traditional fluids.
Benefits and features
- Low viscosity
- Improves bath uniformity and stability
- Enhanced heat-up and cool down rates
- Lower cost than glycol and silicone oil type fluids
- Safe and non-toxic
- Convenient 5 gallon containers
Low Temperature Bath fluid (5 gallons)
Catalog# 7012602
Buy Online & Save 10%A hydrocarbon based fluid with the ideal combination of Low toxicity and Low odor, making it an excellent choice for use in liquid baths. Our low temperature fluid provides an unmatched level of performance without imposing risk to the environment, equipment, or personnel. The fluid offers a low viscosity rating and unequaled heat transfer characteristics through its entire operating temperature range down to -40ēC, with a recommended maximum of +125ēC.
NOTE: This fluid should only be used with the following plastics; ABS, Epoxy, Acetal, Teflon, Viton, Kalrez, Chemraz, Fiberglass, Graphites, Flouroelastimers. For all other plastic types contact Techne for specific recommendations.
A fume hood is recommended for open baths being operated at temperatures above +50ēC.
High Temperature Bath fluid (5 gallons)
Catalog# 7012603
Buy Online & Save 10%The high temperature fluid offers industry a practically non-toxic, versatile bath fluid that has proven to be cost effective and thermally stable at temperatures up to +250ēC. This fluid has demonstrated excellent performance over a wide range of temperature without compromising economics or system integrity. Unlike the less stable mineral oil based fluid, our high temperature fluid provides the user with the confidence and reliability without the premium price of other fluids. Recommended temperature +60 to +250 degrees C.
NOTE: This fluid is not for long term (more than a few hours) continuous use above 100ēC as excessive oxidation will occur. Contact us for special fluids available for high temperature continuous use.As with most high temperature fluids, a fume hood is recommended for operating temperatures above 150ēC.
NOTE: This fluid should only be used with the following plastics; ABS, Epoxy, Acetal, Teflon, Viton, Kalrez, Chemraz, Fiberglass, Graphites, Flouroelastimers. For all other plastic types contact Techne for specific recommendations.
