Accu-Temp RTD Indicator

The Tecal Accu-Temp is a good choice for use as a laboratory grade reference thermometer. It's available in a single or dual channel model, along with direct temperature readout in degrees F, C and ohms. Combine the Tecal Accu-Temp with one of our secondary standard PRT's for a high accuracy temperature measurement system. Don't rely on battery operated, low accuracy hand-held model PRT indicators for your critical temperature measurements.
Download the Tecal Accu-Temp Manual (160kb pdf)
Request literature on this product via mail
Download the Tecal Accu-Temp logging software (696kb zip)

Features & Benefits:
User Programmable linearization (ITS90)
Accepts either 10, 25.5 or 100 ohm Platinum RTD's
Direct digital readout in ° C, ° F, and ohms
Temperature accuracy of thermometer
Temperature and ohmmeter resolution of 0.001
Wide temperature range -200 to +800° C
Uses ITS90 coefficients for probe correction and linearization
Accepts probe alphas of either 0.385 or 0.3925
Optional accessories: analog output, RS-232 and IEEE-488 interfaces
Switchable 120 or 240volt operation
Dimensions: 3 1/2"h x 8 1/2"w x 11 1/2"d
Weight: 9 lbs. (12 lbs. shipping)
Free logging software (RS232 required)
High accuracy: ±0.005ºC(0.009ºF) at -100C, ±0.005ºC(0.009ºF) at 0C,
±0.007ºC(0.013ºF) at 200C, ±0.011ºC(0.020ºF) at 400C & ±0.013ºC(0.023ºF) at 500C
Ohm meter uncertainty: ±0.002 ohms or 15 ppm
1 year warranty - Includes NIST traceable calibration

Tecal Accu-Temp RTD indicator with optional probes

Ordering information

Catalog #

Description

Voltage

Shipping Weight

7002618

Tecal Accu-Temp Two channels

120 & 240 switchable

10 lbs

7002797

Tecal Accu-Temp Single channel

120 & 240 switchable

10 lbs