|
TechneWorks
software (zip 1.5mB)
Techneworks is for use with Techne Dry
block calibrators and
Thermoregulators. Create ramp and dwell programs to
control
your Techne Dry block calibrator and/or Thermoregulator from
a PC.
You can also use the software to calibrate your
thermometers and sensors
and generate calibration
certificates using the Techne bath or Dry block
as a
temperature source. The unit display can act as the reference
or
connect to a selection of external thermometers.
The best news
is that this invaluable tool is available for
free
download.
Download a PDF with
details (200kb)
Techneworks is only functional when
connected to one of the supported units. |
Gensoft
Thermal Cycler software (Zip 2.6mB)
Gensoft is for use with all Techne
Thermal cycler models. Remotely control your Techne Thermal
cycler from a PC.
Select and save programs to and from your hard drive. Daisy chain up to 5
Thermal cyclers in your lab. Contact us for information on the connectors
needed for more than one unit.
|
