- Color (TFT) LCD with touch-screen interface
- Sealed QWheelTM control
- Removable SD & SD/USB memory card
- Plug-in accessory modules
- Secure multi-user operation
- PC software included
Model 6700 covers the
visible wavelength range with a spectral bandwidth of 4nm.
Model 6705 covers the UV/visible wavelength range with a spectral
bandwidth of 4nm.
Model 6715 meets the EP/USP requirements with a spectral bandwidth of
1.5nm across the UV/visible wavelength range.
The large, color touch-screen display ensures the fastest response to operator input and the clearest presentation of options and results. A sealed QWheelTM is provided for fine cursor control or scrolling. With this cutting-edge user interface and novel operating system the 67 series offer the simplest, most intuitive operation in their class. Secure multi-user operation can be selected where each users settings, methods and results are protected by PIN codes. A designated supervisor can control user access and back up data and settings. Open, free use is always available at any time without logging in to the protected areas. For extra security stored information can be held on a removable memory card.
All data, methods and settings can be transferred to another instrument or PC using the removable SD/USB memory card. Multiple instruments are easily formatted with identical settings, while the latest methods can always be uploaded from the memory cards.
The PC software included enables the easy transfer of data and methods from the instrument or SD memory card to the computer for printing, storage, presentation or further manipulation.
The removable sample chamber enables a number of plug-in accessory modules to be fitted, making the rapid configuration (and reconfiguration) of the desired sampling options possible. Accessory modules include an eight cell auto changer, a sipper pump for flow-through cuvettes, a peltier temperature controlled cuvette holder and peltier/sipper system, as well as single 10mm cuvette, long path length and test tube holders.
The
67 series
offer the following modes of
operation
Photometrics for simple Absorbance and %T measurements at selected
wavelengths.
Kinetics for timed measurement and enzyme reaction monitoring.
Quantitation for concentration measurements based on calibration with 1
to 20 standards.
Multi-Wavelength measurements with calculations based on up to 4
discrete wavelengths.
Scanning at an impressive 1500nm/minute, even with data collection at
0.1nm intervals. This enables zooming to higher resolutions without the need
to re-scan and full post scan re-scaling of either axis.
*QWheel is a trade mark of Quantum Technology Group.
| Light Source | Tungsten Halogen (6700) and Xenon (6705/6715) | |
| Optics | Sealed, MgF coated, split beam | |
| Wavelength range | 320-1100nm (6700) 190-1100nm (6705/6715) | |
| Wavelength resolution | 0.1nm | |
| Wavelength accuracy | ±1.0nm | |
| Wavelength repeatability | ±0.2nm | |
| Spectral Bandwidth | 4nm (6700/6705) 1.5nm (6715) | |
| Stray Light | <0.1 at 340nm (6700) <0.05 at 220nm (6705/6715) | |
| Photometric ranges | -0.300 to 3.000A & 0 to 199.9%T | |
| Photometric resolution | 0.001A & 0.1%T | |
| Photometric accuracy | ±0.005 at 1A | |
| Photometric stability | <0.001A per hour | |
| Quantitation range | -99999 to +99999 | |
| Number of Standards | 20 with up to 5 replicates of each | |
| Curve Fit Algorithms | Linear, Quadratic and Cubic functions | |
| Multi-Wavelength Data Points | Up to 4 wavelengths | |
| Calculations | Difference and ratio | |
| Kinetics time limits | 0 to 9999 seconds | |
| Kinetics calibration | Standard or Factor | |
| Scan speed | 1500nm/minute at 0.1nm data steps | |
| Post Scan analysis | Peak/Valley pick, Peak Ratios, Area, Zoom, Wavelength Table, Derivatives, Smoothing | |
| Configuration | Secure multi-user and Free Access | |
| Number of Users | 10 + Supervisor | |
| Number of Methods | >1000 (on internal flash memory or removable media) | |
| Results Storage | >1000 (on internal flash memory or removable media) | |
| Removable Media | MM/SD memory card or SD/USB memory card | |
| Interface | USB, Centronics, Analogue | |
| PC Software | Supplied on CD-ROM with USB interface cable | |
| Mains supply | 100 to 230V ac / 50 or 60Hz | |
| Sample compartment | 150mm (max. height) x 130mm (w) x 210mm (d) | |
| Size | 490 x 390 x 220mm | |
| Weight | 20 lbs |
Ordering Information
| 6700 |
Model 6700 visible range, 4nmSBW Single Beam
spectrophotometer fitted with single 10 x 10 mm cuvette holder, internal
thermal 40-column printer, 1GB of internal memory, 1GB SD/USB memory
card, 100 disposable cuvettes, instruction manual, US/UK/EU power cable,
PC software on CD ROM with interface cable. Configuration: 670-A-E-1-5-3-01-1-0-01-1 |
|
| 6705 |
Model 6705 UV/Visible range, 4nm SBW, Split Beam
spectrophotometer fitted with single 10 x 10 mm cuvette holder, internal
thermal 40-column printer, 1GB of internal memory, 1GB SD/USB memory
card, 100 disposable cuvettes, instruction manual, US/UK/EU power cable,
PC software on CD ROM with interface cable. Configuration: 675-A-E-1-5-3-01-1-0-17-1 |
|
| 6715 |
Model 6715 UV/Visible range, 1.5nm SBW, Split Beam
spectrophotometer fitted with single 10 x 10 mm cuvette holder, internal
thermal 40-column printer, 1GB of internal memory, 1GB SD/USB memory
card, 100 disposable cuvettes, instruction manual, US/UK/EU power cable,
PC software on CD ROM with interface cable. Configuration: 671-A-E-1-5-3-01-1-0-17-1 |
|
| 6715-8 | Model 6715 UV/Visible range, 1.5nm SBW, Split Beam spectrophotometer fitted with an automated eight-position cuvette holder, internal thermal 40-column printer, 1GB of internal memory, 1GB SD/USB memory card, 100 disposable cuvettes, instruction manual, US/UK/EU power cables, PC software on CD ROM with interface cable. Configuration: 671-A-E-1-5-3-02-1-0-17-1 |
Accessories
External Memory Cards (removable media)
019 130 256MB SD card
019 131 512MB SD card
019 132 1GB SD card
019 133 2GB SD card
019 135 1GB SD/USB
019 136 2GB SD/USB
Interchangeable Sample Handling Modules
| 660 802 Single cell module with 10x10mm cuvette holder (630 204*) | |
| 660 402 Automatic 8 cell changer module |
 |
| 660 502 Water heated automatic 6 cell changer module | |
| 660 202 Sipper module |
 |
| 660 302 Peltier module |
 |
660 702 Sipper/Peltier
module
660 902 Single cell module with 10mm cuvette/16 and 24mm dia. tube
holder (637 071*)
661 002 Single cell module with 10x100mm cuvette holder (630 005*)
661 102 Single cell module with micro cuvette holder with reduced
aperture (630 304)
661 202 Single cell module with water heated cuvette holder (648 001*
Sample holders that may be
fitted in any single cell modules marked *
630 204 10mm path length cuvette holder
637 701 Cell holder for 10mm square cuvettes, 16 and 24mm dia. tubes
630 005 10 to 100mm path length cuvette holder
630 304 Micro cuvette holder with reduced aperture
648 001 Water heated single cuvette holder
Additional carousels for
high-throughput and heavy workloads
660 403 Additional carousel for automatic 8 cell changer (for use with
660 402)
660 503 Additional carousel for water heated automatic 6 cell changer
(for use with 660 502)
Additional Accessories
660 001 Dust Cover
060 422 Moulded rack for 16 10x10mm cuvettes
035 088 Visible Calibration Set
Spares
037 702 Paper roll for thermal printer
012 075 Tungsten halogen lamp module
012 146 Xenon lamp module
