dip&flow

DIP AND FLOW COOLERS

Techne Dip and Flow coolers are designed for use at below ambient temperatures down to -35°C. The Flow Coolers work in conjunction with a Techne Thermoregulator; they continually extract heat from the bath fluid by the means of the heat exchanger which is built into the unit.
The cooling head of the Techne® Dip Coolers fit unobtrusively into the corner of the bath and can be secured with a specially designed mounting bracket. Even if cooling can be achieved by cold tap water, a dip cooler is recommended as it conserves water and is easier and more convenient to use. For optimum performance Techne® recommends its tested bath fluids. All refrigeration units should not be exposed to temperatures above 70°C.

Request literature on this product via mail
Download the Dip & Flow cooler manual (213kb pdf)

SPECIFICATIONS
	FC-200	FC-500	RU-200	RU-500
Catalog Number	1070700	1070800	1070500	1070600
Minimum achievable temperature* (`°`C)	-20	-35	-20	-35
time to reach minimum temperature (mins)	90	90	90	90
Cooling capacity: 0`°`C (watts)	140	210	145	240
Cooling capacity: 20`°`C (watts)	140	210	145	240
Cooling capacity: -10`°`C (watts)	110	200	110	230
Internal capacity: (ml)	200	200	-	-
Nominal dimensions (excluding handles etc) Overall w x l x h (mm)	325x420x300	370x430x325	235x420x300	370x430x325
Coil dimensions length (mm) diameter (mm)	- -	- -	85 75	85 75
Hose length to coil (mm)	-	-	1250	1250
Warranty	1 year parts and labor