Electrochemistry Range Accessories
pH Electrodes | pH
Buffers | Conductivity
Cells | Conductivity
Standards | Misc.
Accessories
See the Electrode
Application Selection
Chart for assistance.
pH Electrodes
The pH electrodes listed below are for use with Models 350, 370, 3305, 3510, 3520 and 3540. All electrodes should be used at atmospheric pressure only. All electrodes (except *) are combination type with integral reference, operate over the range of 0 - 14pH, have an overall length of 120mm and are fitted with a 1 meter cable as standard. Alternative cable lengths are available on request.
| Temp. Range | Diameter | Application | ||
| 924 001 | General purpose, epoxy bodied | 0 - 60ºC | 12mm | Liquids |
| 924 002 | Spear type, 12mm stem, glass bodied | 0 - 80ºC | 12mm | Slurries |
| 924 003 | Redox - platinum, glass bodied | 0 - 80ºC | 12mm | Liquids |
| 924 004 | Micro 40mm stem, glass bodied | 0 - 80ºC | 4.5mm (Stem) | Liquids |
| 924 005 | General purpose, glass bodied | 0 - 80ºC | 12mm | Liquids |
| 924 006 | Flat head, glass bodied | 0 - 80ºC | 12mm | Surfaces |
| 924 007 | Semi-micro, 90mm stem, glass bodied | 0 - 80ºC | 4.5mm (Stem) | Liquids |
| 924 008 | Long reach micro, 150mm stem, glass bodied | 0 - 80ºC | 7.5mm (Stem) | Liquids |
| 924 010 | Spear type, 40mm stem, glass bodied | 0 - 80ºC | 6mm (Stem) | Semi-solids |
| 924 011 | Spear type, 25mm stem, glass bodied | 0 - 80ºC | 4mm (Stem) | Semi-solids |
| 924 029 | Low Conductivity Waters, plastic bodied | 0 - 50ºC | 12mm | Liquids |
| 924 030 | Tris buffer, 90mm stem, glass bodied | 0 - 50ºC | 6mm (Stem) | Biological fluids |
| 924 047 | 3 in 1 electrode, epoxy bodied ** | 0 - 80ºC | 12mm | Liquids |
| 924 015 | pH electrode, glass bodied * | 0 - 80ºC | 12mm | Liquids |
| 924 016 | Calomel reference, SJ, glass bodied | 0 - 50ºC | 12mm | Liquids |
| 924 017 | Ag/AgCl reference, DJ, glass bodied | 0 - 50ºC | 12mm | Liquids |
| 924 036 | Ag/AgCl reference | 0 - 100ºC | 12mm | Liquids |
** Integral Temperature Measurement.
Conductivity Cells
The following Conductivity Cells are for use with Models 4510, 4520 and 4330.
| 027 013 | Conductivity Cell with ATC K=1 |
| 027 113 | Conductivity Cell with ATC K=0.1 |
| 027 114 | Conductivity Cell with ATC K=1 (flow through) |
| 027 211 | Conductivity Cell with ATC K=0.1 (Epoxy) |
| 027 212 | Conductivity Cell with ATC (K=1) (Epoxy) |
| 027 213 | Conductivity Cell with ATC (K=10) |
pH Buffers
| 025 113 | pH4 (100ml) capsule 10 off |
| 025 114 | pH7 (100ml) capsule 10 off |
| 025 115 | pH9 (100ml) capsule 10 off |
| 025 116 | pH10 (100ml) capsule 10 off |
| 025 037 | pH4 (500ml) red |
| 025 038 | pH7 (500ml) yellow |
| 025 039 | pH10 (500ml) blue |
| 025 162 | pH9.22 (500ml) |
| 025 163 | pH2 (500ml) |
Conductivity Calibration Standards
|
025 138 |
1413µS standard (500ml) |
|
025 156 |
12.88mS standard (500ml) |
|
025 164 |
84µS standard (500ml) |
|
025 139 |
10µS standard (500ml) |
|
025 165 |
1382ppm TDS standard (500ml) |
Miscellaneous Accessories
| 025 160 | 3M KCl electrode fill solution |
| 025 161 | Electrode cleaning solution |
| 025 157 | Redox standard (200mV) (500ml) |
| 025 158 | Redox standard (300mV) (500ml) |
| 025 159 | Redox standard (465mV) (500ml) |
| 021 030 | UK 230V power supply |
| 021 031 | European 230V power supply |
| 021 032 | US 115V power supply |
| 021 033 | 230V leaded power supply |
| 544 008 | Dust cover |
| 903 200 | Swing Arm electrode holder |
| 543 001 | 40 column printer |
| 542 009 | Interface cable kit |
| 552 050 | BOD Kit |
| 983 030 | Zero powder |
| 522 019 | Membrane Kit and KCl |
| 522 023 | DO2 probe |
| 027 234 | ATC probe for use with Model 3305 |
| 027 232 | ATC probe for use with Models 3310, 3320 and 4330 |
Home
| Products
|
Online Store |
News
Contact Us |
About Us
Copyright © 2007 Techne® Incorporated