Three models are available to cover a wide range of applications. Choose the Model 6280 for the most sensitive determinations with emission wavelengths up to 650nm. Where higher emission wavelengths will be experienced choose the Model 6285 with its red-enhanced detector. For less sensitive applications with a broader range choose the low cost Model 6270.

	Total Energy Transfer (TET) system for maximum sensitivity
	Create and Save secure methods
	Intelligent Filter Modules (IFM) ensure correct filters are fitted
	Raw fluorescence and Concentration values displayed
	Calibration against up to 6 standards possible
	Kinetic (timed reading) functions
	Electrically heated sample holder and sipper pump options
	Compatible with DataWay PC software

All three models offer intuitive operation with a user interface based on logical menus that can be navigated from the simple keypad. Up to 20 methods can be created without restriction and be saved for future use. They can also be locked against accidental change by password entry, ensuring data integrity.

The permanent time and date tag on every stored reading further enhances Good Laboratory Practice, while calibration reminders and operator identity can also be entered to support conformance and traceability of operation.

With press-to-read operation and Total Energy Transfer (TET) technology the output of the high-energy xenon lamp is maximized and its expected life extended, so that it should never need replacing in normal use.

The high quality optics is complemented by the Intelligent Filter Modules (IFM) that can be identified by the system. This enables error messages to be generated and displayed should the wrong filters be fitted or their positions be incorrect.

All models are powered from an external, universal mains adapter suitable for use from 90 to 230Vac, while the 12Vdc input enables use in vehicles or from suitable battery packs.

Where temperature controlled fluorescence studies are necessary an optional electrically heated sample holder is easily fitted. For continuous flow analysis an external sipper pump and a wide range of flow-through cuvettes are also available.

Light Source

Pulsed Xenon Lamp with press-to-read operation

Expected Lifetime

No replacement required in normal operation

Detector

Photomultiplier (Models 6280 & 6285)
Photodiode (Model 6270)

Sensitivity (Quinine Sulphate)

<1ng/ml (Models 6280 & 6285)
1µg/ml (Model 6270)

Dynamic Range

5.2x10⁶ (Models 6280 & 6285)
5.2x10⁴(Model 6270)

Wavelength Range

190 to 650nm (Model 6280)
190 to 850nm (Model 6285)
190 to 1100nm (Model 6270)

Wavelength Selection

Intelligent Filter modules (IFM)

Raw Fluorescence

available on all models

Concentration

available on all models

Calibration

Blank + up to 6 standards on all models

Kinetics (timed readings)

In both of the above modes on all models

Time Limits

1 reading every 3 to 999 seconds

Methods Stored

20 on all models

Results Stored

100/method on all models

GLP

Method lock with password access
Time and Date stamped results
Last calibration date and time stored
Calibration interval set
Calibration due reminder
User ID

Outputs

RS232 serial port

PC Software

Compatible with DataWay (option)

Sample Handling

10mm square cuvette holder (standard)
Heated sample holder (option)
Sipper pump (option)

Power Supply

90 to 230Vac universal mains adapter
12Vdc input (cigarette lighter cable and battery pack options)

Size (w x d x h)

14" x 11" x 6"                         365 x 272 x 160 mm

Weight

13 lbs                                      6 Kg